;------------------------------------------------------------------------------
;
; File: !GDI0006.CFG (98-30)
;
; EISA configuration file for the Eicon.Diehl DIVA  Adapter (1.0).
;
; Copyright (c) Eicon Technology Corporation 1994-1997
;
;------------------------------------------------------------------------------

BOARD
  ID       = "GDI0006"
  NAME     = "Eicon.Diehl DIVA  Adapter (1.0)"
  MFR      = "Eicon Technology Corporation"
  CATEGORY = "NET"
  SLOT     = ISA8OR16
  LENGTH   = 160
  SKIRT    = NO
  READID   = NO
  IOCHECK  = INVALID
  DISABLE  = UNSUPPORTED
  COMMENTS = "ISDN S0 Adapter with DSP"

SWITCH(1) = 4
  NAME     = "PORT"
  STYPE    = DIP
  REVERSE  = YES
  LABEL    = LOC(1-4) "1" "2" "3" "4"
  FACTORY  = LOC(1-4) 1101
  COMMENTS = "This DIP switch on the card configures the I/O Port base address."

SOFTWARE(1) = "If card drivers have to be configured, please use the following settings:\n"

FUNCTION = "ISDN-Adapter"
  TYPE = "NET"
  CONNECTION  = "Standard S0 Interface"
  SUBFUNCTION = "I/O Port Range"
    COMMENTS = "Please set the I/O Port address as configured on the ISDN adapter card."
    CHOICE = "200 - 207"
      LINK
        PORT = 0200h-0207h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 1111
        INIT = SOFTWARE(1) "I/O=200h"
    CHOICE = "220 - 227"
      LINK
        PORT = 0220h-0227h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 1110
        INIT = SOFTWARE(1) "I/O=220h"
    CHOICE = "240 - 247"
      LINK
        PORT = 0240h-0247h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 1101
        INIT = SOFTWARE(1) "I/O=240h"
    CHOICE = "260 - 267"
      LINK
        PORT = 0260h-0267h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 1100
        INIT = SOFTWARE(1) "I/O=260h"
    CHOICE = "280 - 287"
      LINK
        PORT = 0280h-0287h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 1011
        INIT = SOFTWARE(1) "I/O=280h"
    CHOICE = "2A0 - 2A7"
      LINK
        PORT = 02A0h-02A7h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 1010
        INIT = SOFTWARE(1) "I/O=2A0h"
    CHOICE = "2C0 - 2C7"
      LINK
        PORT = 02C0h-02C7h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 1001
        INIT = SOFTWARE(1) "I/O=2C0h"
    CHOICE = "2E0 - 2E7"
      LINK
        PORT = 02E0h-02E7h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 1000
        INIT = SOFTWARE(1) "I/O=2E0h"
    CHOICE = "300 - 307"
      LINK
        PORT = 0300h-0307h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 0111
        INIT = SOFTWARE(1) "I/O=300h"
    CHOICE = "320 - 327"
      LINK
        PORT = 0320h-0327h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 0110
        INIT = SOFTWARE(1) "I/O=320h"
    CHOICE = "340 - 347"
      LINK
        PORT = 0340h-0347h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 0101
        INIT = SOFTWARE(1) "I/O=340h"
    CHOICE = "360 - 367"
      LINK
        PORT = 0360h-0367h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 0100
        INIT = SOFTWARE(1) "I/O=360h"
    CHOICE = "380 - 387"
      LINK
        PORT = 0380h-0387h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 0011
        INIT = SOFTWARE(1) "I/O=380h"
    CHOICE = "3A0 - 3A7"
      LINK
        PORT = 03A0h-03A7h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 0010
        INIT = SOFTWARE(1) "I/O=3A0h"
    CHOICE = "3C0 - 3C7"
      LINK
        PORT = 03C0h-03C7h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 0001
        INIT = SOFTWARE(1) "I/O=3C0h"
    CHOICE = "3E0 - 3E7"
      LINK
        PORT = 03E0h-03E7h
        SIZE = BYTE
        SHARE = NO
        INIT = SWITCH(1) LOC(1-4) 0000
        INIT = SOFTWARE(1) "I/O=3E0h"

  SUBFUNCTION = "Interrupt Request Line"
    COMMENTS = "The IRQ line parameter is programmable by software. Please configure
                the desired IRQ value in here. If the driver is able to do so, it will
                read this value and configure the card accordingly."
    CHOICE = "IRQ 3"
      LINK
        IRQ = 3
        SHARE = NO
        TRIGGER = EDGE
        INIT = SOFTWARE(1) "IRQ=3"
    CHOICE = "IRQ 4"
      LINK
        IRQ = 4
        SHARE = NO
        TRIGGER = EDGE
        INIT = SOFTWARE(1) "IRQ=4"
    CHOICE = "IRQ 9/2"
      LINK
        IRQ = 9
        SHARE = NO
        TRIGGER = EDGE
        INIT = SOFTWARE(1) "IRQ=2"
    CHOICE = "IRQ 10"
      LINK
        IRQ = 10
        SHARE = NO
        TRIGGER = EDGE
        INIT = SOFTWARE(1) "IRQ=10"
    CHOICE = "IRQ 11"
      LINK
        IRQ = 11
        SHARE = NO
        TRIGGER = EDGE
        INIT = SOFTWARE(1) "IRQ=11"
    CHOICE = "IRQ 12"
      LINK
        IRQ = 12
        SHARE = NO
        TRIGGER = EDGE
        INIT = SOFTWARE(1) "IRQ=12"