BOARD
  ID = "DELFC03"
  NAME = "Paradise Hi-Res Graphics Card"
  MFR = "DELL"
  CATEGORY = "VID"
  SLOT = ISA8
  LENGTH = 140
  COMMENTS = "
              \n
              Modes		     Address        Memory\n\n
	       Mono (Text Mode)      B000 (Hex)     4KB\n
               Mono (HIRES HALF)     B000 (Hex)     32KB\n
               Mono (HIRES FULL)     B000 (Hex)     64KB\n
               CGA		     B800 (Hex)     32KB\n
              \n"
  HELP = "
          Use the V>iew D>etail by slot to view configuration. 
          Use E>dit Change F>unction (or INSERT) to select options.
          \n
          \n"


SWITCH(1) = 3
  NAME = "SWITCH Mono/CGA"
  STYPE = DIP
  VERTICAL= YES
  Factory = LOC(1-3) 011	 ; Mono enabled and parallel port disabled.       
  INITVAL = LOC(1-3) x11       
  COMMENTS = "
              Lever 1 selects MONO (off or up) or CGA (on or down).
              Lever 2 and 3 should be set to ON or UP."


FUNCTION = "Hi-Res Adapter"
  TYPE = "VID"
  CHOICE = "Mono (TEXT Mode)"
    FREE
      PORT = 03B0h-03BBh
      MEMORY = 4k
        ADDRESS = 0B0000h
        MEMTYPE = OTHER	    
      INIT = SWITCH(1) LOC(1) 0	
  CHOICE = "Mono (HIRES HALF Mode)"
    FREE
      PORT = 03B0h-03BBh
      MEMORY = 32k
        ADDRESS = 0B0000h
        MEMTYPE = OTHER	    
      INIT = SWITCH(1) LOC(1) 0	
  CHOICE="Mono (HIRES FULL Mode)"
    FREE
      PORT = 03B0h-03BBh
      MEMORY = 64k
        ADDRESS = 0B0000h
        MEMTYPE = OTHER	    
      INIT = SWITCH(1) LOC(1) 0	
  CHOICE = "CGA"
    FREE
      PORT = 03D0h-03DFh
      MEMORY = 32k
        ADDRESS = 0B8000h
        MEMTYPE = OTHER
      INIT = SWITCH(1) LOC(1) 1