;
;   Digital Prioris Series System Board
;
BOARD
  ID="DEC5215"
  NAME="Prioris HX Series Computer"
  MFR="Digital Equipment Corporation"
  CATEGORY="SYS"
  SLOT=EMB(0)
  READID=YES
  COMMENTS=" The Prioris HX 6000MP Series basically designed in following
             configuration : It consists of the CPU/memory module, the main
	     logic board, operator control panel (OCP) board, and SCSI 
	     backplane. In CPU/memory modules is for Pentium Pro-based
	     CPUs with ECC memory module. The main logic board contains 
	     PCI/EISA chipsets & others controllers to provide PC-compatible
	     parallel, serial, keyboard, mouse ports, and on-board VGA, 
	     Ethernet and two PCI/SCSI adapters. It also provides six PCI 
	     expansion slots (3 slots on the primary PCI bus and 3 slots on
	     the secondry PCI bus) and five EISA expansion slots."
  HELP=" This is the base module configuration options file. The user should 
         review and configure selectable options per system resources."

SYSTEM
  NONVOLATILE = 8K
  AMPERAGE = 13200
  SLOT(1)  = EISA(1)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 1"
  SLOT(2)  = EISA(2)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 2"
  SLOT(3)  = EISA(3)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 3"
  SLOT(4)  = EISA(4)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 4"
  SLOT(5)  = EISA(5)  LENGTH=341  BUSMASTER=YES  LABEL="EISA 5"

  MEMORY=640K ADDRESS=0K CACHE=YES STEP=128K

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

SWITCH(1)   = 8
   NAME     = "Main Logic Board"
   STYPE    = DIP
   VERTICAL = YES
   REVERSE  = YES
   LABEL    = LOC(1-8) "SW1" "SW2" "SW3" "SW4" "SW5" "SW6" "SW7" "SW8"
   FACTORY  = LOC(1-8) 10101000
   INITVAL  = LOC(1-8) xxxxxx00
   COMMENTS = "[SWITCH]                 [OFF]      [ON]\N
                SW1-BIOS UPGRADE        DISABLED   ENABLED\N
                SW2-RECOVERY MODE       NORMAL     ENABLED\N
                SW3-BOOT BLOCK UPGRADE  DISABLED   ENABLED\N
                SW4-PASSWORD CLEAR      NORMAL     ENABLED\N
                SW5-RSM                 INSTALLED  NOT INSTALLED\N
                SW6-NVRAM CLEAR         NORMAL     ENABLED\N
                SW7-RESERVED\N
                SW8-RESERVED\N"

SWITCH(2)   = 4
   NAME     = "CPU Board"
   STYPE    = DIP
   VERTICAL = YES
   REVERSE  = YES
   LABEL    = LOC(1-4) "SW1" "SW2" "SW3" "SW4"
   FACTORY  = LOC(1-4) 1101
   INITVAL  = LOC(1-4) xxxx
   COMMENTS = "[SWITCH]        [UP (OFF)]  [DN (ON)]\N
                SW1-CPU CLOCK  60.00MHz    66.66MHz\N
	       \N
	      [FREQ. MULT]    [SW2]       [SW3]       [SW4]\N
		2X            [DN (ON)]   [DN (ON)]   [DN (ON)]\N
		2.5X          [UP (OFF)]  [DN (ON)]   [DN (ON)]\N   
		3X            [DN (ON)]   [UP (OFF)]  [DN (ON)]\N   
		3.5X          [UP (OFF)]  [UP (OFF)]  [DN (ON)]\N   
		4X            [DN (ON)]   [DN (ON)]   [UP (OFF)]\N" 

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;; Include cfg file extension (overlay)
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
INCLUDE = "DEC5215.OVL"