;
;   Cubix  BC4045 EISA 32-Bit System Board
;
;   (C)Copyright Cubix, INC.  1994
;      All Rights Reserved.
;
;   10/12/94 v1.4
BOARD
	ID="CUB4045"
	NAME = "Cubix EISA 32-Bit 486 System Board"
	MFR = "Cubix, Inc."
	CATEGORY = "SYS"
	AMPERAGE = 3600
	SLOT=EMB(0)
	READID=YES
	COMMENTS = "
	   This is a Hi-Performance EISA 32-Bit 486
	   System Board from Cubix, Inc., Carson City,
	   Nv. It has 256KB of external direct-mapped 
	   write-back Cache, VESA VGA and 10Base-T."

	HELP="
	   This is the main board configuration
	   help field for the Cubix 486 EISA
	   Evaluation Board."

SYSTEM
	NONVOLATILE=4096
	AMPERAGE = 35000
	SLOT(1)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(2)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(3)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(4)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(5)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(6)=EISA
		LENGTH=341
		BUSMASTER=YES
	SLOT(7)=EISA
		LENGTH=341
		BUSMASTER=NO
	SLOT(8)=EISA
		LENGTH=341
		BUSMASTER=NO
	SLOT(9)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(10)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(11)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(12)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(13)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(14)=ISA8
		LENGTH=341
		BUSMASTER=NO
	SLOT(15)=ISA8
		LENGTH=341
		BUSMASTER=NO

	MEMORY=640K     ADDRESS = 0     CACHE = YES STEP = 64K
	MEMORY=64M      ADDRESS = 1M    CACHE = YES STEP = 64k

SWITCH(2) = 8
  NAME ="SWITCH BLOCK 2"
  STYPE = DIP
  VERTICAL = NO
  REVERSE = NO
  INITVAL = LOC(8) 0
  FACTORY = LOC(8-1) 00010011
    COMMENTS = "SW2-1 ENABLES 10BASE-T ETHERNET 
		SW2-6,7 NOT USED
		SW2-2 ENABLES VGA CONTROLLER
		SW2-3,4 SELECT IRQ 10 OR 15 FOR IES FUNCTION<
		SW2-5 ENABLES IRQ FOR PS/2 MOUSE
		SW2-8 ALWAYS OFF"


;SYSTEM BOARD RESOURCES

GROUP="Basic Main Board Functions"
	TYPE="SYS"

FUNCTION="TIMER"
	COMMENTS="Reserves IRQ, DMA and other resources"
	HELP="Help field for system board resources"
	CHOICE="Reserved"
		FREE
			IRQ=0

FUNCTION="Real-time Clock"
	CHOICE="Reserved"
		FREE
			IRQ=8
			PORT=70H-71H

FUNCTION="Co-processor"
	TYPE="NPX,387"
	CHOICE="Installed"
		LINK
			IRQ=13
			SHARE=YES

FUNCTION="Keyboard"
	TYPE="KEY"
	CHOICE="101 Key"
		SUBTYPE="101"
		LINK
			IRQ=1
			PORT=60H
			PORT=64H

FUNCTION="Floppy Disk"
  TYPE = "MSD,FPYCTL"
  CHOICE = "ALWAYS ENABLED"
     LINK
       IRQ = 6
       PORT = 03F0H-03F7H 
       DMA = 2

FUNCTION = "IDE Hard Drive Subsystem"
  TYPE = "MSD,DSKCTL"
  CHOICE = "ALWAYS ENABLED"
     LINK
       IRQ = 14
       PORT = 01F0H-01F7H

FUNCTION = "COM1, COM2, LPT1 Subsystem"
   TYPE = "COM"
   CHOICE = "ALWAYS ENABLED"
      LINK
	 IRQ = 4
	 IRQ = 3
	 IRQ = 7
	 PORT = 03F8H-03FFH
	 PORT = 02F8H-02FFH
	 PORT = 03B8H-03BFH


FUNCTION = "PS/2 MOUSE Subsystem"

    CHOICE = "ENABLED, SW2-5 ON"
	LINK
		IRQ = 12
		INIT=SWITCH(2) LOC (5) 1
    CHOICE = "DISABLED, SW2-5 OFF"
	LINK
		INIT=SWITCH(2) LOC (5) 0

FUNCTION = "AC FAIL INTERRUPT"
   CHOICE = "DISABLED, SW2-3 OFF, SW2-4 OFF"
     LINK
	INIT=SWITCH(2) LOC (4 3) 00
   CHOICE = "INT15, SW2-4 ON, SW2-3 OFF"
     LINK
	IRQ = 15
	INIT=SWITCH(2) LOC (4 3) 10
   CHOICE = "INT10, SW2-3 ON, SW2-4 OFF"
     LINK
	IRQ = 10
	INIT=SWITCH(2) LOC (4 3) 01

FUNCTION="SuperVGA Subsystem"
 TYPE="VID"
 CHOICE = "VGA ENABLED, SW2-2 ON"
      LINK
	    PORT=03C0h-03CFh
	    PORT=03D0h-03DFh
	    INIT=SWITCH(2) LOC (2) 1
      LINK
	    MEMORY=64K
	    ADDRESS=0A0000h
	    MEMTYPE=OTH
      LINK
	    MEMORY=32K
	    ADDRESS=0B0000h
	    MEMTYPE=OTH
      LINK
	    MEMORY=32K 
	    ADDRESS=0B8000h
	    MEMTYPE=OTH
      LINK
	    MEMORY=32K
	    ADDRESS=0C0000h
	    MEMTYPE=OTH
	    WRITABLE=NO

  CHOICE = "VGA DISABLED, SW2-2 OFF"
      LINK
	    INIT=SWITCH(2) LOC (2) 0

FUNCTION = "AMD Ethernet Subsystem"
  CHOICE = "PORT 300H, IRQ 5, SW2-1 ON"
    LINK
      PORT = 0300H
      IRQ = 5
      INIT=SWITCH(2) LOC (7 6 1) 001
  CHOICE = "PORT 300H, IRQ 3, SW2-1 ON"  
    LINK
      PORT = 0300H
      IRQ = 3
      INIT=SWITCH(2) LOC (7 6 1) 001
  CHOICE = "PORT 320H, IRQ 5, SW2-1 ON"
    LINK
      PORT = 0320H
      IRQ = 5
      INIT=SWITCH(2) LOC (7 6 1) 001
  CHOICE = "PORT 320H, IRQ 3, SW2-1 ON"
    LINK
      PORT = 0320H
      IRQ = 3
      INIT=SWITCH(2) LOC (7 6 1) 001
  CHOICE = "PORT 340H, IRQ 5, SW2-1 ON"
    LINK 
      PORT = 0340H
      IRQ = 5
      INIT=SWITCH(2) LOC (7 6 1) 001
  CHOICE = "PORT 340H, IRQ 3, SW2-1 ON"
    LINK
      PORT = 0340H
      IRQ = 3
      INIT=SWITCH(2) LOC (7 6 1) 001
  CHOICE = "PORT 360H, IRQ 5, SW2-1 ON"
    LINK 
      PORT = 0360H
      IRQ = 5
      INIT=SWITCH(2) LOC (7 6 1) 001
  CHOICE = "PORT 360H, IRQ 3, SW2-1 ON"
    LINK 
      PORT = 0360H
      IRQ = 3
      INIT=SWITCH(2) LOC (7 6 1) 001
  CHOICE = "DISABLED, SW2-1 OFF"
    LINK
      INIT=SWITCH(2) LOC (7 6 1) 000


FUNCTION = "Power Supply Status Port"
      CHOICE = "ALWAYS ENABLED"
	LINK
	    PORT = 03A0H

ENDGROUP


GROUP="System Board Memory Functions"

FUNCTION="System Board Base Memory"
	TYPE="MEM"
	COMMENTS="Always present"
	HELP="Always present"

	CHOICE="System Board Base Memory"
		LINK
		MEMORY=640K
			ADDRESS=0K
			WRITABLE=YES
			MEMTYPE=SYS
			CACHE=YES

FUNCTION="Extended Memory"
    TYPE="MEM"
    HELP="The memory is organized as 4 banks in 2 SIMMs.
	  B0/2 (Banks-0 & 2) = SIMM1
	  B1/3 (Banks-1 & 3) = SIMM2

	  Simm types are 1MX36  4 Megabytes Total
			 2MX36  8 Megabytes Total
			 4MX36 16 Megabytes Total
			 8MX36 32 Megabytes Total
			 16MX36 64 Megabytes Total

	  The amount of installed RAM for use as extended memory is
	  user-selectable.  Determine the amount of memory installed
	  on the BC4045 and then select the amount to be used as
	  extended memory in the following choices.  If there is more
	  than 64MB you must make a selection for memory above 64MB."
  CHOICE="You choose: 3M - 63M by pressing F6"
     FREE
	MEMORY = 3M - 63M STEP = 4M
	  ADDRESS = 1M
	  WRITABLE = YES
	  MEMTYPE = SYS
	  CACHE = YES

FUNCTION="Extended Memory above 64MB"
    TYPE="MEM"
    HELP="The amount of installed RAM for use as extended memory is
	  user-selectable.  Determine the amount of memory installed
	  on the BC4045 and then select the amount to be used as
	  extended memory in the following choices.  If there is more
	  than 64MB you must make a selection for memory above 64MB."
  CHOICE="You choose: 0M - 64M by pressing F6"
     FREE
	MEMORY = 0M - 64M STEP = 4M
	  ADDRESS = 64M
	  WRITABLE = YES
	  MEMTYPE = SYS
	  CACHE = YES



ENDGROUP