; EISA Configuration File for Computone ISA-MPA2
; Revision History:
; 12/16/93	MAG	Original Version

BOARD
	ID = "CTN0066"
	NAME = "Computone ISA-MPA2"
	MFR = "Computone Corporation"
	CATEGORY = "COM"
	AMPERAGE = 2000
	SLOT = ISA16
	LENGTH = 250

	COMMENTS = 
		"Computone's ISA-MPA2 is an intelligent multiprotocol
		 adapter supporting two synchronous channels.  This
		 board does not support automatic configuration. Use this
		 configuration utility to select options and to view resulting
		 DIP switch settings.\n
		 Record your selections: you may need to enter them when
		 installing your software."

	HELP =
		"Option/Configuration Disk, Version 2.06\n
		Select Base I/O address, Interrupt, and memory
		area.\n
		Then view switch settings for manually configuring
		the board.  View resources and note your selections;
		the information may be required when you install the
		software."

SWITCH(1) = 8
	STYPE = DIP
	NAME = "S1"
	REVERSE = YES
	FACTORY = LOC(1-8) 11001111

SOFTWARE(1) =
	"No software information available at this time"

FUNCTION = "Computone ISA-MPA2"

	CONNECTION = 
	"Two 25-pin Micro-D connectors\n
	 Signals:\n
	 Full support for Synchronous RS232/
	 EIA530/EIA530A/V.35"

	TYPE = "COM"

SUBFUNCTION = "Base I/O Address"
	COMMENTS=
		"Select the base I/O address of this board.  A 16-byte
		 block is used. You must set switches on the board to
		 configure it for the selected address.\n
		 For more advice, select [help]."
	HELP=
		"When installing software, you may be asked for the
		base I/O address.  Remember it."


	CHOICE = "300h-30fh" 
		LINK
			PORT = 0300h-030fh
			INIT = SWITCH(1) LOC(3-8) 001111
	CHOICE = "310h-31fh" 
		LINK
			PORT = 0310h-031fh
			INIT = SWITCH(1) LOC(3-8) 001110
	CHOICE = "320h-32fh" 
		LINK
			PORT = 0320h-032fh
			INIT = SWITCH(1) LOC(3-8) 001101
	CHOICE = "330h-33fh" 
		LINK
			PORT = 0330h-033fh
			INIT = SWITCH(1) LOC(3-8) 001100
	CHOICE = "340h-34fh" 
		LINK
			PORT = 0340h-034fh
			INIT = SWITCH(1) LOC(3-8) 001011
	CHOICE = "350h-35fh" 
		LINK
			PORT = 0350h-035fh
			INIT = SWITCH(1) LOC(3-8) 001010
	CHOICE = "360h-36fh" 
		LINK
			PORT = 0360h-036fh
			INIT = SWITCH(1) LOC(3-8) 001001
	CHOICE = "370h-37fh" 
		LINK
			PORT = 0370h-037fh
			INIT = SWITCH(1) LOC(3-8) 001000
	CHOICE = "380h-38fh" 
		LINK
			PORT = 0380h-038fh
			INIT = SWITCH(1) LOC(3-8) 000111
	CHOICE = "390h-39fh" 
		LINK
			PORT = 0390h-039fh
			INIT = SWITCH(1) LOC(3-8) 000110
	CHOICE = "3a0h-3afh" 
		LINK
			PORT = 03a0h-03afh
			INIT = SWITCH(1) LOC(3-8) 000101
	CHOICE = "3b0h-3bfh" 
		LINK
			PORT = 03b0h-03bfh
			INIT = SWITCH(1) LOC(3-8) 000100
	CHOICE = "3c0h-3cfh" 
		LINK
			PORT = 03c0h-03cfh
			INIT = SWITCH(1) LOC(3-8) 000011
	CHOICE = "3d0h-3dfh" 
		LINK
			PORT = 03d0h-03dfh
			INIT = SWITCH(1) LOC(3-8) 000010
	CHOICE = "3e0h-3efh" 
		LINK
			PORT = 03e0h-03efh
			INIT = SWITCH(1) LOC(3-8) 000001
	CHOICE = "3f0h-3ffh" 
		LINK
			PORT = 03f0h-03ffh
			INIT = SWITCH(1) LOC(3-8) 000000
	CHOICE = "110h-11fh" 
		LINK
			PORT = 0110h-011fh
			INIT = SWITCH(1) LOC(3-8) 101110
	CHOICE = "130h-13fh" 
		LINK
			PORT = 0130h-013fh
			INIT = SWITCH(1) LOC(3-8) 101100
	CHOICE = "150h-15fh" 
		LINK
			PORT = 0150h-015fh
			INIT = SWITCH(1) LOC(3-8) 101010
	CHOICE = "170h-17fh" 
		LINK
			PORT = 0170h-017fh
			INIT = SWITCH(1) LOC(3-8) 101000
	CHOICE = "190h-19fh" 
		LINK
			PORT = 0190h-019fh
			INIT = SWITCH(1) LOC(3-8) 100110
	CHOICE = "1b0h-1bfh" 
		LINK
			PORT = 01b0h-01bfh
			INIT = SWITCH(1) LOC(3-8) 100100
	CHOICE = "1d0h-1dfh" 
		LINK
			PORT = 01d0h-01dfh
			INIT = SWITCH(1) LOC(3-8) 100010
	CHOICE = "1f0h-1ffh" 
		LINK
			PORT = 01f0h-01ffh
			INIT = SWITCH(1) LOC(3-8) 100000
	CHOICE = "210h-21fh" 
		LINK
			PORT = 0210h-021fh
			INIT = SWITCH(1) LOC(3-8) 011110
	CHOICE = "230h-23fh" 
		LINK
			PORT = 0230h-023fh
			INIT = SWITCH(1) LOC(3-8) 011100
	CHOICE = "250h-25fh" 
		LINK
			PORT = 0250h-025fh
			INIT = SWITCH(1) LOC(3-8) 011010
	CHOICE = "270h-27fh" 
		LINK
			PORT = 0270h-027fh
			INIT = SWITCH(1) LOC(3-8) 011000
	CHOICE = "290h-29fh" 
		LINK
			PORT = 0290h-029fh
			INIT = SWITCH(1) LOC(3-8) 010110
	CHOICE = "2b0h-2bfh" 
		LINK
			PORT = 02b0h-02bfh
			INIT = SWITCH(1) LOC(3-8) 010100
	CHOICE = "2d0h-2dfh" 
		LINK
			PORT = 02d0h-02dfh
			INIT = SWITCH(1) LOC(3-8) 010010
	CHOICE = "2f0h-2ffh" 
		LINK
			PORT = 02f0h-02ffh
			INIT = SWITCH(1) LOC(3-8) 010000

SUBFUNCTION = "Memory Size & Base Address"
	COMMENTS = "Some software may wish to map the board into
		    a block of memory addresses as well as into the
		    I/O space.  If so, you should reserve that address
		    range here."
	HELP = "Consult your software documentation for further information.
		Record your selections for future reference."

	
	CHOICE = "Disabled"       
	CHOICE = "64K at 080000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0080000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at 090000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0090000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0a0000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00a0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at 0a0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 00a0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0a4000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00a4000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0a8000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00a8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0a8000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00a8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0ac000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00ac000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0b0000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00b0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0b0000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00b0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at 0b0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 00b0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0b4000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00b4000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0b8000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00b8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0b8000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00b8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0bc000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00bc000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0c0000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00c0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0c0000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00c0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at 0c0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 00c0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0c4000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00c4000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0c8000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00c8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0c8000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00c8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0cc000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00cc000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0d0000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00d0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0d0000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00d0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at 0d0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 00d0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0d4000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00d4000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0d8000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00d8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0d8000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00d8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0dc000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00dc000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0e0000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00e0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0e0000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00e0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at 0e0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 00e0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0e4000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00e4000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0e8000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00e8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0e8000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00e8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0ec000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00ec000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0f0000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00f0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0f0000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00f0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at 0f0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 00f0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0f4000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00f4000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0f8000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00f8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "32K at 0f8000h" 
		COMBINE
			MEMORY = 32k
			ADDRESS = 00f8000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "16K at 0fc000h" 
		COMBINE
			MEMORY = 16k
			ADDRESS = 00fc000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at a00000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0a00000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at b00000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0b00000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at c00000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0c00000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at c40000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0c40000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at c80000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0c80000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at cc0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0cc0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at d00000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0d00000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at d40000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0d40000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at d80000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0d80000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at dc0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0dc0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at e00000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0e00000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at e40000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0e40000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at e80000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0e80000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at ec0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0ec0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at f00000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0f00000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at f40000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0f40000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at f80000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0f80000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	CHOICE = "64K at fc0000h" 
		COMBINE
			MEMORY = 64k
			ADDRESS = 0fc0000h
			SIZE = WORD
			MEMTYPE = oth
			DECODE = 24
	
	
SUBFUNCTION = "Interrupt"
	COMMENTS = "Most software will require the board to use an 
		    interrupt.  If so, you should reserve it here.
		    Record your selection for future reference, the
		    software will be responsibile for configuring the
		    board to use the proper interrupt."
	HELP = "Consult your software documentation for further information."

	CHOICE = "IRQ15"
		LINK
			IRQ = 15
			SHARE = "CTN.MPA"
			TRIGGER = EDGE
	CHOICE = "IRQ12"
		LINK
			IRQ = 12
			SHARE = "CTN.MPA"
			TRIGGER = EDGE
	CHOICE = "IRQ11"
		LINK
			IRQ = 11
			SHARE = "CTN.MPA"
			TRIGGER = EDGE
	CHOICE = "IRQ10"
		LINK
			IRQ = 10
			SHARE = "CTN.MPA"
			TRIGGER = EDGE
	CHOICE = "IRQ7"
		LINK
			IRQ = 7
			SHARE = "CTN.MPA"
			TRIGGER = EDGE
	CHOICE = "IRQ5"
		LINK
			IRQ = 5
			SHARE = "CTN.MPA"
			TRIGGER = EDGE
	CHOICE = "IRQ4"
		LINK
			IRQ = 4
			SHARE = "CTN.MPA"
			TRIGGER = EDGE
	CHOICE = "IRQ3"
		LINK
			IRQ = 3
			SHARE = "CTN.MPA"
			TRIGGER = EDGE
	CHOICE = "Polled (No interrupt)"

SUBFUNCTION = "User Options"
	COMMENTS = "DIP switches 1 and 2 can be set to select
		   user-dependent options. The meaning of these
		   options may change when non-standard firmware
		   is used.  For the standard firmware, the
		   following options are available:\n
		   Default:  All power-on self-tests enabled.\n
		   Option 1: Skip walking-bit memory test.\n
		   Option 2: Skip SCA tests.\n
		   Option 3: Skip walking-bit and SCA tests.\n"

	HELP = "Refer to software documentation to determine the
		proper settings."

	CHOICE = "Default  (switch 1 & 2 closed)"
		COMBINE
		INIT = SWITCH(1) LOC(1-2) 11b
	CHOICE = "Option 1 (switch 1 open)"
		COMBINE
		INIT = SWITCH(1) LOC(1-2) 01b
	CHOICE = "Option 2 (switch 2 open)"
		COMBINE
		INIT = SWITCH(1) LOC(1-2) 10b
	CHOICE = "Option 3 (switch 1 & 2 open)"
		COMBINE
		INIT = SWITCH(1) LOC(1-2) 00b