FUNCTION="Recovery server option"
 HELP=""
  CHOICE="Disabled"
  CHOICE="Recovery server"
   LINK
   MEMBER="ASRSTAT2","0"
   SHARE=NO
  CHOICE="Primary server"
   LINK
   MEMBER="ASRSTAT2","0"
   SHARE=NO

 FUNCTION="Recovery server port"
 HELP=""
  CHOICE="COM1"
  CHOICE="COM2"

 FUNCTION="Recovery time-out"
 HELP=""
 CHOICE="1 minute"
 CHOICE="2 minutes"
 CHOICE="3 minutes"
 CHOICE="4 minutes"
 CHOICE="5 minutes"
 CHOICE="10 minutes"

 FUNCTION="Software error recovery boot option"
 HELP="Use the arrow keys to select the boot option when a software ASR
 reset occurs.  Select 'Boot operating system' to quickly restore
 the server after an ASR reset.  Select 'Boot Compaq Utilities' to
 help diagnose the cause of the ASR reset and to remotely
 diagnose the ASR error."
  CHOICE="Boot operating system"
  CHOICE="Boot Compaq Utilities"

 FUNCTION="Thermal shutdown"
 HELP="If Thermal Reset is enabled, the O/S will shutdown the system if
 the temperature exceeds specifications."
  CHOICE="Enabled"
  CHOICE="Disabled"

 FUNCTION="UPS shutdown"
 HELP="If enabled, the O/S will shutdown the system after it
 detects an A/C power failure. "
   CHOICE="Disabled"
   CHOICE="Enabled"

 FUNCTION="UPS shutdown threshold"
 HELP="Begin orderly O/S shutdown when UPS battery reserve is less than UPS
 shutdown threshold."
   CHOICE="5 minutes"
   CHOICE="1 minutes"
   CHOICE="2 minutes"
   CHOICE="3 minutes"
   CHOICE="4 minutes"
   CHOICE="6 minutes"
   CHOICE="7 minutes"
   CHOICE="8 minutes"
   CHOICE="9 minutes"
   CHOICE="10 minutes"
   CHOICE="11 minutes"
   CHOICE="12 minutes"
   CHOICE="13 minutes"
   CHOICE="14 minutes"
   CHOICE="15 minutes"
   CHOICE="16 minutes"
   CHOICE="17 minutes"
   CHOICE="18 minutes"
   CHOICE="19 minutes"
   CHOICE="20 minutes"
   CHOICE="21 minutes"
   CHOICE="22 minutes"
   CHOICE="23 minutes"
   CHOICE="24 minutes"
   CHOICE="25 minutes"
   CHOICE="26 minutes"
   CHOICE="27 minutes"
   CHOICE="28 minutes"
   CHOICE="29 minutes"
   CHOICE="30 minutes"

ENDGROUP

GROUP="Server Failure Notification"

 FUNCTION="Pager status"
 HELP="If enabled, the pager dial string and pager message (if present)
 will be dialed after an ASR reset."
  CHOICE="Disabled"
  CHOICE="Enabled"
   LINK
   MEMBER="ASRSTAT1","0"
   SHARE=NO

 FUNCTION="Pager dial string"
 HELP="Enter the dial string followed by the pager's telephone number.
 This number will be dialed when an ASR reset occurs if the Pager status
 is set to 'Enabled'.\n\n
 The following dial modifiers can be used with Hayes(TM)
 compatible modems:\n
 T\tUse tone dialing\n
 P\tUse pulse dialing\n
 ,\tPause two seconds\n
 W\tWait for second dial tone\n
 @\tWait for a ring followed by five\n
 \tor more seconds of silence\n
 !\tFlash\n
 ;\tReturns the modem to the command\n
 \tstate\n
 S=n\tDials a number stored in a dial\n
 \tstring\n
 R\tNormal dial\n\n
 Refer to your modem's documentation for more information on
 the commands used by your modem."
  CHOICE=""

 FUNCTION="Pager message"
 HELP="Enter a message that uniquely identifies this computer.
 This optional message will be sent to the pager after the pager
 dial string has been dialed to indicate which machine reset.  Most pager
 services require the '#' character to follow the message.  If no
 message is required, delete the '#'.  The Pager dial string and
 message are only dialed when Pager status is set to 'Enabled'."
  CHOICE=""

 FUNCTION="Pager test"
 HELP="Select this function and press ENTER to send the
 current Pager dial string and Pager message to the modem at
 the selected serial interface.  Use this feature to
 ensure that Server Failure Notification is configured
 for your pager service."
  CHOICE="Select to test pager setup"

ENDGROUP

GROUP="Remote Options"

 FUNCTION="Serial interface"
 HELP="Use the arrow keys to select the communications port
 for the modem used by ASR."
 COMMENTS="\nSelect the communications port for the modem used by the Server
 Failure Notification and Remote Options."

  CHOICE="COM2"
  CHOICE="COM1"

 FUNCTION="Serial fixed baud rate"
 SHOW=EXP
 HELP="This should only be used for communication equipment which is
 incapable of shifting baud rates."
 COMMENTS="Select the fixed baud rate which will be used to establish
 communications."
 CHOICE="None"
 CHOICE="1200"
 CHOICE="2400"
 CHOICE="9600"
 CHOICE="14400"

 FUNCTION="Port initialization commands"
 SHOW=EXP
 HELP="Port initializations commands can be used to manipulate equipment
 such as RS-232 'smart' data switches. Do not place modem commands here."
 CHOICE=""

 FUNCTION="Modem initialization commands"
 SHOW=EXP
 HELP="Modem intializations commands can be used override or add to the
 default modem initialization commands issued by Remote."
 CHOICE=""


 FUNCTION="Dial in status"
 HELP="If enabled, the modem will be set to automatically answer
 incoming calls.  You will then be able to call the server using
 a terminal emulator set for 8 data bits, 1 stop bit, and no parity
 and remotely run the Compaq Utilities.  If Dial out status is
 enabled but no connection is made after 5 attempts, the modem
 will be set to answer incoming calls."
 RESOURCE="ASRREMOTE",UNIQUE
  CHOICE="Disabled"
   LINK
   MEMBER="ASRREMOTE","0"
   SHARE=NO
  CHOICE="Enabled"

 FUNCTION="Dial out status"
 HELP="If enabled, the dial out string will be dialed after an ASR reset
 when the server boots to the Compaq Utilities.  If unable to connect
 after 5 attempts, the modem will be put in auto answer mode regardless
 of the Dial in status."
  CHOICE="Disabled"
  CHOICE="Enabled"
   LINK
   MEMBER="ASRREMOTE","0"
   SHARE=NO

 FUNCTION="Dial out string"
 HELP="Enter the dial string followed by the remote computer's
 telephone number.  This number will be dialed when an ASR reset
 occurs if the Dial out status is set to 'Enabled'.\n\n
 The following dial modifiers can be used with Hayes(TM)
 compatible modems:\n
 T\tUse tone dialing\n
 P\tUse pulse dialing\n
 ,\tPause two seconds\n
 W\tWait for second dial tone\n
 @\tWait for a ring followed by five\n
 \tor more seconds of silence\n
 !\tFlash\n
 ;\tReturns the modem to the command\n
 \tstate\n
 S=n\tDials a number stored in a dial\n
 \tstring\n
 R\tNormal dial\n\n
 Refer to your modem's documentation for more information on
 the commands used by your modem."
  CHOICE=""

 FUNCTION="Network status"
 HELP="If enabled, Remote will allow you to connect via the network."
   CHOICE="Disabled"
   CHOICE="Enabled"

 FUNCTION="Network protocol"
 HELP="If the network remote is enabled the chosen protocol will be used."
   CHOICE="IPX"
   CHOICE="IP"

 FUNCTION="Network token-ring source routing"
 HELP="Enable Source Routing if your token-ring network utilizes source
 routing and you wish to be able to communicate between nodes of different
 rings."
   CHOICE="Disabled"
   CHOICE="Enabled"

 FUNCTION="Network controller"
 HELP="If you chose Custom, you will need to create the NET.CFG file and move
 it and any required driver file to the system partition."
   CHOICE="Compaq"
   CHOICE="Custom"

 FUNCTION="Network host name"
 HELP="The Host name is the name by which the Server will be identified on the
 Network."
   CHOICE=""

 FUNCTION="Network card slot"
 HELP="Compaq EISA boards are the only boards supported for this feature.
 Other boards may be used but will require that you select Custom controller,
 create the NET.CFG file yourself and copy it and any required drivers to
 the System Partition."
   CHOICE=""

 FUNCTION="Network frame type"
 HELP="The default is ETHERNET_802.3. See you network documentation for more
 description concerning frame types."
   CHOICE="ETHERNET_802.3  (IPX Only)"
   CHOICE="ETHERNET_802.2  (IPX Only)"
   CHOICE="ETHERNET_II     (IPX or IP)"
   CHOICE="ETHERNET_SNAP   (IPX or IP)"
   CHOICE="TOKEN-RING      (IPX Only)"
   CHOICE="TOKEN-RING_SNAP (IPX or IP)"

 FUNCTION="Network IP address"
 HELP="The IP Address is required if you wish to use the IP network
 protocol. Consult you network systems administrator for your IP address.
 Please enter the address in the format xxx.xxx.xxx.xxx "
   CHOICE=""

 FUNCTION="Network IP netmask"
 HELP="The IP netmask is recommended if you wish to use the IP network
 protocal. Consult you network systems administrator for your IP netmask.
 Please enter the netmask in the format xxx.xxx.xxx.xxx "
   CHOICE=""

 FUNCTION="Network IP router address"
 HELP="The IP router address is required if you wish to use the IP network
 protocal and have access to Remote from a different subnet. Consult your
 network systems administrator for the address of your IP router.
 Please enter the router address in the format xxx.xxx.xxx.xxx "
   CHOICE=""

 FUNCTION="" SHOW=NO CHOICE=""
 FUNCTION="" SHOW=NO CHOICE=""

ENDGROUP