BOARD
   ID = "COG1100"               ; Product ID.
   NAME = "Cogent eMASTER+ EISA Fast Ethernet Adapter"
   MFR = "Cogent Data Technologies, Inc."
   CATEGORY = "NET"             ; Category, i.e. Network Board.
   SLOT = EISA                  ; Uses EISA Slot.
   LENGTH = 216                 ; Length of Board in Millimeters.
   READID = YES                 ; Board ID can be read
   AMPERAGE = 1000              ;
   IOCHECK = INVALID            ; No IOCHKERR bit.
   DISABLE = SUPPORTED          ; Disabled by clearing
                                ;  the control register ENABLE bit.

   COMMENTS = "The Cogent eMASTER+ EISA Fast Ethernet family
               provides high-performance operation for the EISA bus. 
               The Combo versions provide 10Base2 support via a
               BNC connector. The 10/100 models support 10 Mbps and
               100 Mpbs line speed autosensing."

   HELP = "The Cogent eMASTER+ EISA Fast Ethernet family provides 32-bit bus
           mastering Fast Ethernet performance.  This configuration process
           will help you select the IRQ and Ethernet cable type used by your
           adapter."

IOPORT(1) = 0zC85h
        INITVAL = 000xxx1x                      ;slot specific I/O only

IOPORT(2) = 0zC86h
        INITVAL = xxxx1rr1                      ;Int is enablled by default

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
GROUP = "Interrupt Selection"

   ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
   FUNCTION = "eMASTER+ EISA IRQ Number"
      COMMENTS = "The eMASTER+ EISA supports unshared (edge-triggered)
                  interrupts only. Select an unshared interrupt number 
                  for use by the eMASTER+ EISA."
      HELP = "Use unshared interrupts with the eMASTER+ EISA adapter."

        CHOICE = "IRQ  5, trigger:edge, unshared"
          SUBTYPE = "IRQ5"
          LINK
            IRQ = 5
              TRIGGER = EDGE
              SHARE = NO
            INIT = IOPORT(2) LOC(5-4) 00

        CHOICE = "IRQ  9, trigger:edge, unshared"
          SUBTYPE = "IRQ9"
          LINK
            IRQ = 9
              TRIGGER = EDGE
              SHARE = NO
            INIT = IOPORT(2) LOC(5-4) 01

        CHOICE = "IRQ 10, trigger:edge, unshared"
          SUBTYPE = "IRQ10"
          LINK
            IRQ = 10
              TRIGGER = EDGE
              SHARE = NO
            INIT = IOPORT(2) LOC(5-4) 10

        CHOICE = "IRQ 11, trigger:edge, unshared"
          SUBTYPE = "IRQ11"
          LINK
            IRQ = 11
              TRIGGER = EDGE
              SHARE = NO
            INIT = IOPORT(2) LOC(5-4) 11
ENDGROUP
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
FUNCTION="DMA channel"
COMMENTS = "The eMASTER+ EISA supports type C DMA based 32-bit support
            for higher performance."
      HELP = "Select an available DMA channel for the eMASTER+ EISA adapter." 

     CHOICE="Channel 3"
      FREE
        DMA   = 3
        SHARE = NO
        SIZE  = DWORD
        TIMING= TYPEC
        INIT  = IOPORT(2) LOC(7-6) 00

      CHOICE="Channel 5"
      FREE
        DMA   = 5
        SHARE = NO
        SIZE  = DWORD
        TIMING= TYPEC
        INIT  = IOPORT(2) LOC(7-6) 01

      CHOICE="Channel 6"
      FREE
        DMA   = 6
        SHARE = NO
        SIZE  = DWORD
        TIMING= TYPEC
        INIT  = IOPORT(2) LOC(7-6) 10

      CHOICE="Channel 7"
      FREE
        DMA   = 7
        SHARE = NO
        SIZE  = DWORD
        TIMING= TYPEC
        INIT  = IOPORT(2) LOC(7-6) 11

FUNCTION="Compressed EISA cycle support"
      COMMENTS = "The eMASTER+ EISA supports compressed EISA bus cycles.
                  Enable this option for higher network performance if your
                  system board supports compressed EISA cycles. Check your system
                  board manual for more information."
      HELP = "Enable this only if your system board supports compressed EISA cycles"

      CHOICE="Not Supported"
      FREE
        INIT  = IOPORT(1) LOC(4) 0

      CHOICE="Supported"
      FREE
        INIT  = IOPORT(1) LOC(4) 1