; file name = !BUS6001.CFG
BOARD
  ID = "BUS6001"
  NAME = "BusTek 32 Bit Bus Master EISA-to-Ethernet Controller (v1.1)"
  MFR = "BusTek"
  CATEGORY = "NET"
  SLOT = EISA
  LENGTH = 241			;milli-meter
  SKIRT = NO
  READID = YES			;readable product ID
  IOCHECK = VALID
  DISABLE = SUPPORTED
  BUSMASTER = 20 
  COMMENTS = "
This board provides a bus master interface between the EISA bus\n
and Ethernet.  As an intelligent board it offloads the system\n
processor of Ethernet send and receive processing as well\n
as link layer functionalities."
  HELP = "
This board supports full automatic configuration."

IOPORT(1) = 0ZC85h
  INITVAL = LOC(7-0) xxxxxxxx
IOPORT(2) = 0ZC84h
  INITVAL = LOC(7-0) xxxxxxx1


FUNCTION = "Controller Configuration"
  TYPE = "NET"


  SUBFUNCTION = "Host Interrupt Request"
    CHOICE = "INT3 - default"
      LINK
        INIT = IOPORT(1) LOC(3-0) 1100
        IRQ =  3
          SHARE = NO
          TRIGGER = LEVEL 

    CHOICE = "INT9"
      LINK
        INIT = IOPORT(1) LOC(3-0) 1110
        IRQ = 9
          SHARE = NO
          TRIGGER = LEVEL

    CHOICE = "INT10"
      LINK
        INIT = IOPORT(1) LOC(3-0) 1111
        IRQ = 10
          SHARE = NO
          TRIGGER = LEVEL

    CHOICE = "INT11"
      LINK
        INIT = IOPORT(1) LOC(3-0) 1000
        IRQ = 11
          SHARE = NO
          TRIGGER = LEVEL

    CHOICE = "INT12"
      LINK
        INIT = IOPORT(1) LOC(3-0) 1001
        IRQ = 12
          SHARE = NO
          TRIGGER = LEVEL

    CHOICE = "INT15"
      LINK
        INIT = IOPORT(1) LOC(3-0) 1011
        IRQ = 15
          SHARE = NO
          TRIGGER = LEVEL

    CHOICE = "INT5"
      LINK
        INIT = IOPORT(1) LOC(3-0) 1101
        IRQ = 5
          SHARE = NO
          TRIGGER = LEVEL

    CHOICE = "INT14"
      LINK
        INIT = IOPORT(1) LOC(3-0) 1010
        IRQ = 14
          SHARE = NO
          TRIGGER = LEVEL

    CHOICE = "Disable INT"
      FREE
        INIT = IOPORT(1) LOC(3-0) 0000

  SUBFUNCTION = "Thin/Thick Net Selection"
    TYPE = "NET"
    CHOICE = "Thin Net - default"
      LINK
        INIT = IOPORT(1) LOC(7) 1

    CHOICE = "Thick Net"
      LINK
        INIT = IOPORT(1) LOC(7) 0