BOARD
  ID          = "ATT2402"
  NAME        = "AT&T SCSI Host Adapter A (StarServer E)"
  MFR         = "AT&T"
  CATEGORY    = "MSD"
  SLOT        = EISA
  LENGTH      = 341
  SKIRT       = NO
  READID      = YES
  BUSMASTER   = 999
  AMPERAGE    = 2000
  IOCHECK     = INVALID
  DISABLE     = SUPPORTED
  COMMENTS = "This is a high performance SCSI Host Adapter."

IOPORT(1)     = 0zC90h
IOPORT(2)     = 0zC84h
IOPORT(3)     = 0zC88h
  SIZE        = WORD
IOPORT(4)     = 0zC89h
IOPORT(5)     = 0zC8Ah
IOPORT(6)     = 0zC8Bh
IOPORT(7)     = 0zC8Ch
IOPORT(8)     = 0zC8Dh
IOPORT(9)     = 0zC8Eh
IOPORT(10)    = 0zC8Fh

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;


GROUP         = "Hard Drive & SCSI Device"
TYPE          = "MSD,DSKCTL"
FUNCTION      = "I/O Ports"
  COMMENTS    = "Select Primary to boot in ISA mode."
  CHOICE      = "Primary (Bootable)"
    LINK
    PORT      = 1F0h
      SIZE    = WORD
    PORT      = 1F1h-1F7h
    INIT      = IOPORT(1) LOC(1) 0
    INIT      = IOPORT(4) LOC(7) 0
  CHOICE      = "Secondary"
    LINK
    PORT      = 170h
      SIZE    = WORD
    SHARE     = YES
    PORT      = 171h-177h
    SHARE     = YES
    INIT      = IOPORT(1) LOC(1) 1
    INIT      = IOPORT(4) LOC(7) 1

FUNCTION      = "Interrupt Number"
  COMMENTS    = "Select 14-Edge to boot in ISA mode.\n
                 Select 12-Level or 15-Level to share interrupts."

  CHOICE      = "14 - Edge (Bootable)"
    FREE
    IRQ       = 14
    TRIGGER   = EDGE
    INIT      = IOPORT(1) LOC(5 4 3) 100
    INIT      = IOPORT(1) LOC(0) 0
    INIT      = IOPORT(4) LOC(6) 0
    INIT      = IOPORT(5) LOC(6) 0
    INIT      = IOPORT(6) LOC(6) 1
    INIT      = IOPORT(7) LOC(6) 1
    INIT      = IOPORT(8) LOC(6) 1

  CHOICE      = "14 - Level"
    FREE
    IRQ       = 14
    TRIGGER   = LEVEL
    SHARE     = YES
    INIT      = IOPORT(1) LOC(5 4 3) 100
    INIT      = IOPORT(1) LOC(0) 1
    INIT      = IOPORT(4) LOC(6) 1
    INIT      = IOPORT(5) LOC(6) 0
    INIT      = IOPORT(6) LOC(6) 1
    INIT      = IOPORT(7) LOC(6) 1
    INIT      = IOPORT(8) LOC(6) 1

  CHOICE      = "15 - Edge"
    FREE
    IRQ       = 15
    TRIGGER   = EDGE
    INIT      = IOPORT(1) LOC(5 4 3) 010
    INIT      = IOPORT(1) LOC(0) 0
    INIT      = IOPORT(4) LOC(6) 0
    INIT      = IOPORT(5) LOC(6) 1
    INIT      = IOPORT(6) LOC(6) 1
    INIT      = IOPORT(7) LOC(6) 1
    INIT      = IOPORT(8) LOC(6) 1

  CHOICE      = "15 - Level"
    FREE
    IRQ       = 15
    TRIGGER   = LEVEL
    SHARE     = YES
    INIT      = IOPORT(1) LOC(5 4 3) 010
    INIT      = IOPORT(1) LOC(0) 1
    INIT      = IOPORT(4) LOC(6) 1
    INIT      = IOPORT(5) LOC(6) 1
    INIT      = IOPORT(6) LOC(6) 1
    INIT      = IOPORT(7) LOC(6) 1
    INIT      = IOPORT(8) LOC(6) 1

  CHOICE      = "12 - Edge"
    FREE
    IRQ       = 12
    TRIGGER   = EDGE
    INIT      = IOPORT(1) LOC(5 4 3) 001
    INIT      = IOPORT(1) LOC(0) 0
    INIT      = IOPORT(4) LOC(6) 0
    INIT      = IOPORT(5) LOC(6) 0
    INIT      = IOPORT(6) LOC(6) 0
    INIT      = IOPORT(7) LOC(6) 1
    INIT      = IOPORT(8) LOC(6) 1

  CHOICE      = "12 - Level"
    FREE
    IRQ       = 12
    TRIGGER   = LEVEL
    SHARE     = YES
    INIT      = IOPORT(1) LOC(5 4 3) 001
    INIT      = IOPORT(1) LOC(0) 1
    INIT      = IOPORT(4) LOC(6) 1
    INIT      = IOPORT(5) LOC(6) 0
    INIT      = IOPORT(6) LOC(6) 0
    INIT      = IOPORT(7) LOC(6) 1
    INIT      = IOPORT(8) LOC(6) 1

  CHOICE      = "Disabled"
    DISABLE   = YES
    FREE
    INIT      = IOPORT(1) LOC(5 4 3) 000

FUNCTION      = "Drive C (Target ID=0)"
   CHOICE     = "Enabled"
 LINK
    INIT      = IOPORT(5) LOC(5-3) 000
    ; target id drive C
    INIT      = IOPORT(5) LOC(2-0) 000
    ; LUN id  drive C

   CHOICE     = "Disabled"
 LINK
   INIT       = IOPORT(5) LOC(7) 1

FUNCTION      = "Drive D (Target ID=1)"

   CHOICE     = "Disabled"
 LINK
   INIT       = IOPORT(6) LOC(7) 1

   CHOICE     = "Enabled"
 LINK
  INIT        = IOPORT(6) LOC(5-3) 001
    ; target id drive D
  INIT        = IOPORT(6) LOC(2-0) 000
    ; LUN id  drive D

FUNCTION      = "SCSI ID"
   CHOICE     = "7"
 LINK
   INIT       = IOPORT(4) LOC(5-3) 111
   CHOICE     = "6"
   LINK
   INIT       = IOPORT(4) LOC(5-3) 110
   CHOICE     = "4"
   LINK
   INIT       = IOPORT(4) LOC(5-3) 100

ENDGROUP

FUNCTION      = "Synch Transfer Negotiation"
   COMMENTS   = "Select Disabled only for testing purposes or if a device does
                 not correctly handle synchronous negotiations."

SUBFUNCTION   = "SCSI ID 7-0"
   CHOICE     = "Enabled"
   LINK
   INIT       = IOPORT(9) LOC(7-0)11111111
   CHOICE     = "Disabled"
   LINK
   INIT       = IOPORT(9) LOC(7-0)00000000

FUNCTION      = "!ATT2402.CFG Version"
  TYPE="VER"
   CHOICE     = "Version = 002D"
     LINK
; REMOVE THESE STATEMENTS IF EXTENDED ISA DRIVES ARE TO BE SELECTED
       INIT       = IOPORT(7) LOC(7) 1

       INIT       = IOPORT(8) LOC(7) 1
; DO NOT REMOVE THIS ONE - IT ENABLES THE LUNMAP
       INIT       = IOPORT(10) LOC(7-0) 11111000

       INIT       = IOPORT(2) LOC(0) 1       ; enable scsi bus