; ========================================================================
; AIR SCSI-2V ADVANCED VESA BUS MASTER SCSI CONTROLLER
; This is the configuration file for the AIR ADVANCED VESA SCSI CONTROLLER.
; The configuration file is provided so that the user can enable or disable
; some special built-in features of the board.       Version 1.0 7/18/1992
; ========================================================================

BOARD
    ID  ="AIR2101"
    NAME="AIR SCSI-2V"
    MFR="A.I.R. INC."
    CATEGORY="MSD"
    SLOT=EISA
    LENGTH=220
    AMPERAGE=2000
    SKIRT=NO
    READID = YES
    COMMENTS="
          AIR SCSI-2V is a high performance VESA SCSI controller board
          This board has:
          . NCR 53C710 SCSI INPUT OUTPUT PROCESSOR (SIOP).
          . Up to 4K of on-board high speed sram.
          . Onboard floppy disk controller, can be enabled or disabled
            through the configuration file.
          . Supports Fast SCSI (up to 10Mbytes per second data transfer)."

    HELP="This is the board configuration information help field
              for the AIR-SCSI-A controller board. User should
              set the type of hard drive in system CMOS as NOT INSTALLED"


FUNCTION = "SELECT THE ADDRESS SPACE OF THE ADAPTER, 20K INSIZE"

    TYPE = "ROM"
    HELP="This feature allows user to locate the address space
          of the adapter, 20K Read only is for the adapter ROM,
          4K memory is for the adapter shared fast SRAM, and
          the last 64Bytes is for the SIOP controller."

    CHOICE = "Enable the Adapter at 0D8000H as the 1st Adapter"
        LINK
        MEMORY   = 20K
        ADDRESS  = 0D8000h
        WRITABLE = NO
        MEMTYPE  = OTH
        ; BOARD SRAM
        LINK
        MEMORY   =  4K
        ADDRESS  = 0DF000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR0011

    CHOICE = "Enable the Adapter at 0D8000H as the 2nd Adapter"
        LINK
        ; BOARD SRAM
        MEMORY   =  4K
        ADDRESS  = 0DE000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR0111

    CHOICE = "Enable the Adapter at 0D8000H as the 3rd Adapter"
        LINK
        ; BOARD SRAM
        MEMORY   =  4K
        ADDRESS  = 0DD000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR1011

    CHOICE = "Enable the Adapter at 0D0000H as the 1st Adapter"
        LINK
        MEMORY   = 20K
        ADDRESS  = 0D0000h
        WRITABLE = NO
        MEMTYPE  = OTH
        ; BOARD SRAM
        LINK
        MEMORY   =  4K
        ADDRESS  = 0D7000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR0010

    CHOICE = "Enable the Adapter at 0D0000H as the 2nd Adapter"
        LINK
        ; BOARD SRAM
        MEMORY   =  4K
        ADDRESS  = 0D6000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR0110

    CHOICE = "Enable the Adapter at 0D0000H as the 3rd Adapter"
        LINK
        ; BOARD SRAM
        MEMORY   =  4K
        ADDRESS  = 0D5000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR1010


    CHOICE = "Enable the Adapter at 0C8000H as the 1st Adapter"
        LINK
        MEMORY   = 20K
        ADDRESS  = 0C8000h
        WRITABLE = NO
        MEMTYPE  = OTH
        ; BOARD SRAM
        LINK
        MEMORY   =  4K
        ADDRESS  = 0CF000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR0001

    CHOICE = "Enable the Adapter at 0C8000H as the 2nd Adapter"
        LINK
        ; BOARD SRAM
        MEMORY   =  4K
        ADDRESS  = 0CE000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR0101

    CHOICE = "Enable the Adapter at 0C8000H as the 3rd Adapter"
        LINK
        ; BOARD SRAM
        MEMORY   =  4K
        ADDRESS  = 0CD000h
        WRITABLE = YES
        MEMTYPE  = OTH
        CACHE    = NO
          INIT = PORTADR(0ZC8Bh) BYTE RRRR1001

FUNCTION = "ENABLE OR DISABLE THE FLOPPY CONTROLLER"

    TYPE = "DSK"

    HELP="This feature allows user enable or disable the onboard
          floppy controller."

    CHOICE = "Enable The Floppy Controller"
        FREE
          DMA = 2
        LINK
          IRQ = 6
          PORT = 0370h-0377h
          INIT = PORTADR(0ZC8Bh) BYTE RRR1RRRR

    CHOICE = "Disable The Floppy Controller"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE RRR0RRRR

FUNCTION = "SELECT SCSI ID"

    TYPE = "MSD"
    HELP="This feature allows user to select the priority level
          of the adapter.  The priority levels range up from 0 to 7"

    CHOICE = "SCSI ID 7"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE 111RRRRR

    CHOICE = "SCSI ID 6"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE 110RRRRR

    CHOICE = "SCSI ID 5"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE 101RRRRR

    CHOICE = "SCSI ID 4"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE 100RRRRR

    CHOICE = "SCSI ID 3"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE 011RRRRR

    CHOICE = "SCSI ID 2"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE 010RRRRR

    CHOICE = "SCSI ID 1"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE 001RRRRR

    CHOICE = "SCSI ID 0"
        FREE
          INIT = PORTADR(0ZC8Bh) BYTE 000RRRRR


FUNCTION = "SELECT INTERRUPT CHANNEL"

    TYPE = "OTH"

    HELP="This feature allows user to disable the interrupt of the adapter"

    CHOICE = "Interrupt Channel 11"
        LINK
        IRQ = 11
        SHARE = NO
        TRIGGER = EDGE
          INIT = PORTADR(0ZC8Dh) BYTE RRRRR001

    CHOICE = "Interrupt Channel 10"
        LINK
        IRQ = 10
        SHARE = NO
        TRIGGER = EDGE
          INIT = PORTADR(0ZC8Dh) BYTE RRRRR010

    CHOICE = "Interrupt Channel 14"
        LINK
        IRQ = 14
        SHARE = NO
        TRIGGER = EDGE
          INIT = PORTADR(0ZC8Dh) BYTE RRRRR011

    CHOICE = "Interrupt Channel 15"
        LINK
        IRQ = 15
        SHARE = NO
        TRIGGER = EDGE
          INIT = PORTADR(0ZC8Dh) BYTE RRRRR101

    CHOICE = "Interrupt Channel 9"
        LINK
        IRQ = 9
        SHARE = NO
        TRIGGER = EDGE
          INIT = PORTADR(0ZC8Dh) BYTE RRRRR110

    CHOICE = "Interrupt Channel 12"
        LINK
        IRQ = 12
        SHARE = NO
        TRIGGER = EDGE
          INIT = PORTADR(0ZC8Dh) BYTE RRRRR111

FUNCTION = "ENABLE OR DISABLE SCSI PARITY"

    CHOICE = "Enable SCSI Parity Check"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE RRRR1RRR

    CHOICE = "Disable SCSI Parity Check"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE RRRR0RRR

FUNCTION = "ENABLE OR DISABLE SCSI AUTO SENSE"

    CHOICE = "Enable SCSI Auto Sense"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE RRR1RRRR

    CHOICE = "Disable SCSI Auto Sense"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE RRR0RRRR

FUNCTION = "ENABLE OR DISABLE SCSI SYNCHRONOUS INITITIATION"

    CHOICE = "Disable SCSI Synchronous Initiation"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE RR0RRRRR

    CHOICE = "Enable SCSI Synchronous Initiation"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE RR1RRRRR

FUNCTION = "ENABLE OR DISABLE SCSI DISCONNECT"

    CHOICE = "Disable SCSI Disconnect"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE R0RRRRRR

    CHOICE = "Enable SCSI Disconnect"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE R1RRRRRR

FUNCTION = "DISK DRIVE CAPACITY"

    CHOICE = "Disk Drive Capacity Less Than 1Giga BYTES"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE 0RRRRRRR

    CHOICE = "Disk Drive Capacity Larger Than 1Giga BYTES"
        LINK
          INIT = PORTADR(0ZC8Dh) BYTE 1RRRRRRR