;
;   ACME Disk Controller
;
BOARD
  ID = "ACE6010"
  NAME = "ACME Disk Controller"
  MFR = "ACME"
  CATEGORY = "MSD"
  SLOT = ISA16
  LENGTH=241			     ;HEIGHT=121
  BUSMASTER=200		     
  COMMENTS="This is the Board Identification Block comment field
	    for the ACME Disk Controller."
  HELP="This is the Board Identification Block help field
	for the ACME Disk Controller."

SWITCH(1) = 4
  NAME = "SW1"
  STYPE = DIP
  FACTORY = LOC(1-4) 1110
  COMMENTS = "Switch 1 of SW1 is reserved (OFF) for 181 boards (no hard disk).
	      \nSwitch 3 of SW1 is reserved for 181-001 all Revs (no Serial
	       Port on those boards)."
  HELP="This is the Switch Identification Block help field
	for the 1st set of switches for the ACME Disk Controller."

JUMPER(1) = 4
  JTYPE = paired
  NAME = "J1"
  COMMENTS = "Jumpers J1 and J2 are not the standard pins-and-connector
	      jumpers.	Located in the lower middle of the board, they
	      are the two lumps with four silver strips each, two that
	      are broken and two that connect across the block."
  HELP="This is the Jumper Identification Block help field
	for the 1st set of jumpers on the ACME Disk Controller."

JUMPER(2) = 4
  JTYPE = paired
  NAME = "J2"
  COMMENTS="This is the Jumper Identification Block comment field
	    for the 2nd set of jumpers on the ACME Disk Controller."
  HELP="This is the Jumper Identification Block help field
	for the 2nd set of jumpers on the ACME Disk Controller."

JUMPER(3) = 4
  JTYPE = TRIPOLE
  NAME = "J3"
  INITVAL = LOC(4-1) 0N11
  COMMENTS="This is the Jumper Identification Block comment field
	    for the 3rd set of jumpers on the ACME Disk Controller."
  HELP="This is the Jumper Identification Block help field
	for the 3rd set of jumpers on the ACME Disk Controller."

FUNCTION = "Floppy diskette controller"
  TYPE = "MSD,FPYCTL"
  COMMENTS="This is the Function Statement Block comment field
	    for the floppy diskette controller for the ACME Disk
	    Controller."
  HELP="This is the Function Statement Block help field for the
	floppy diskette controller for the ACME Disk Controller."

  CHOICE = "Floppy diskette controller"
    HELP="This is the Choice Statement Block help field
	  for the ACME Disk Controller."

    FREE
      IRQ = 11
      DMA = 6
    LINK
      PORT = 03F0h-03F7h|0370h-377h
      INIT = JUMPER(2) LOC(4-1) 0011|1100