;
; ACME Tape Controller
;
BOARD
  ID = "ACE4010"
  NAME = "ACME Tape Controller"
  MFR = "ACME"
  CATEGORY = "MSD"
  SLOT = ISA8
  LENGTH = 336		     ;HEIGHT = 102
  READID = NO
  COMMENTS="This is the Board Identification Block comment field
	    for the ACME Tape Controller Slot Type ISA8."
  HELP="This is the Board Identification Block help field
	for the ACME Tape Controller Slot Type ISA8."

SWITCH(1)=10
  NAME="SW1"
  STYPE=DIP
  VERTICAL=NO
  REVERSE = YES
  FACTORY = LOC(1-10) 1111111000
  LABEL = LOC(1-10) "1" "2" "3" "4" "5" "6" "7" "8" "9" "10"
  COMMENTS="This is the Switch Identification Block comment field
	    for the 1st set of switches for the ACME Tape Controller."
  HELP="This is the Switch Identification Block help field
	for the 1st set of switches for the ACME Tape Controller."

SWITCH(2)=8
  NAME="SW2"
  STYPE=ROTARY
  VERTICAL=NO
  REVERSE = YES
  FACTORY = LOC(1-8) 00001000
  LABEL = LOC(1-8) "1" "2" "3" "4" "5" "6" "7" "8" 
  COMMENTS="This is the Switch Identification Block comment field
	    for the 2nd set of switches for the ACME Tape Controller."
  HELP="This is the Switch Identification Block help field
	for the 2nd set of switches for the ACME Tape Controller."

JUMPER(1)=12
  NAME="J1"
  JTYPE=PAIRED
  VERTICAL=NO
  LABEL=LOC(12-1) "2" "3" "4" "5" "6" "7" "1" "2" "3" "1" "2" "3"
  COMMENTS="This is the Jumper Identification Block comment field
	    for the 1st set of jumpers on the ACME Tape Controller."
  HELP="This is the Jumper Identification Block help field
	for the 1st set of jumpers on the ACME Tape Controller."

SOFTWARE(1)="
  One of the following programs must be executed from
  the DOS prompt: QT.EXE, SYTOS.EXE, or QIC.EXE.\n
  The following parameters will be requested when installing
  the above programs and should be recorded:\n\n"

FUNCTION = "Tape Controller"
  TYPE = "MSD"
  COMMENTS="This is the Function Statement Block comment field
	    for the ACME Tape Controller."
  HELP="This is the Function Statement Block help field
	for the ACME Tape Controller."

  CHOICE = "Tape Controller"
    SUBTYPE = "TAPCTL"
    HELP="This is the Choice Statement Block help field
	  for the ACME Tape Controller, SUBTYPE = TAPCTL."

    link
      PORT = 308h - 30bh | 338h - 33bh | 0e68h - 0e6bh | 398h - 39bh |
	     3c8h - 3cbh
      INIT = SWITCH(1) LOC(1-10) 1111111000 | 1100011000 | 1101001000 |
				 1100110000 | 1101100000
      INIT = SWITCH(2) LOC(1-8) 00000100 | 01000000 | 00100000 |
				 00010000 | 00000010
      INIT = SOFTWARE(1) "PORT=308h" | "PORT=338h" | "PORT=0e68h" | "PORT=398h" | "PORT=3C8h"

    link
      IRQ = 6 | 2 | 4 | 5 | 3 | 7
      INIT = JUMPER(1) LOC(12-7) 010000 | 100000 | 001000 | 000100 |
				 000010 | 000001
      INIT = SOFTWARE(1) "IRQ=3" | "IRQ=2" | "IRQ=4" | "IRQ=5" | "IRQ=6" | "IRQ=7"

    link
      DMA = 1 | 2 | 3
      INIT = SOFTWARE(1) "DMA=1" | "DMA=2" | "DMA=3"
      INIT = JUMPER(1) LOC(6-1) 100100 | 010010 | 001001