;
;  ACME Arcnet
;
BOARD
  ID = "ACE3010"
  NAME = "ACME Arcnet Plan"
  MFR = "ACME"
  CATEGORY = "NET"
  SLOT = ISA8OR16
  LENGTH = 285			      ;HEIGHT = 102
  READID = no
  COMMENTS = "Board has hard wired IRQ 2.\n
	      The Workstation ARCNET Node Address must be entered in
	      Switch block RP2.  See manual for details."
  HELP="This is the Board Identification Block help field
	for the ACME Arcnet Board Slot Type ISA8OR16."

SWITCH(1) = 8
  NAME = "RP1"
  STYPE = dip
  reverse=yes
  COMMENTS="This is the Switch Identification Block comment field
	    for 1st set of switches for the ACME Arcnet Board."
  HELP="This is the Switch Identification Block help field
	for 1st set of switches for the ACME Arcnet Board."

FUNCTION = "Plan 2000"
  TYPE = "NET"
  COMMENTS="This is the Function Statement Block comment field
	    for Plan 2000 for the ACME Arcnet Board."
  HELP="This is the Function Statement Block help field
	for Plan 2000 for the ACME
	Arcnet Board."

  CHOICE = "Network Adapter"
  HELP="This is the Choice Statement Block help field
	for the Network Adapter for the ACME Arcnet Board."

    free
      IRQ = 5

    link
;NOTE: Memory address can be decoded by board at finer increments, but these
;      are the addresses shown in the manual.  Could be x2000h-xE000h.
      MEMORY = 8K
	  ADDRESS =	      0D0000h | 0C0000h | 080000h | 090000h |
		    0A0000h | 0B0000h
	  MEMTYPE = other
	  INIT = switch(1) loc(1 2 3 4 5 6 7)
			      1110100 | 1111100 | 1111110 | 1110110 |
		    1111010 | 1110010